Skip to main content
Version: 0.4.x

MCP9808 temp sensor

MCP9808

One of temperature sensors used in relay boards. You can have the other one mounted, so first check what hardware you have! Only one MCP9808 is supported right now.

You need to know I2C address of device you want to connect to!

Example config​

Example config
mcp9808:
  - id: temp
    address: 0x18
    update_interval: 60s

Configuration variables:​

  • id (Optional, string, default: Address of I2C device) - uniquely identifies this device in MQTT and Home Assistant
  • address (Required, string) - I2C address of the device
  • update_interval (Optional, timeperiod, default: 60 seconds) - how often this sensor should update